Home About Us Products News Feedback Contact Job
 
 
Product
 
   
   
   
 
 
Product
Location:Home >> Product Show卫生级微孔过滤器
 
Microporous filter

Stainless steel microporous filter, by folding microporous membrane filter and stainless steel outerbarrel, assembled in a single core or multi-core filter, filter cylinder using quick clamp or quick opening ring bolt connection, loading and unloading, convenient cleaning filter element. The filtersurface mirror polishing, no dead angle, conform to "GMP" standard.

Can be customized cartridge or bag type sanitary filter.

 

        Performance characteristics

1, small volume, light weight, convenient use, large filtering area, low block rate, high filtering speed, no pollution, good heat stability and chemical stability.
2, can remove the great mass of particles, so it is widely used for filtration and sterilization process.
3, both inside and outside the health level of mirror polishing, conform to the hygiene standards.
The 4 core socket, using precision boring, install the filter element is accurate and rapid.
5, widely used in food, beverage, pre filter, biological medicine, electronics, cosmetics, water treatment, brewing, electronics, petrochemical and other industries and terminal precision filtration.

The main technical indicators
1, the cartridge can be mounted element from the 1 core -100 core, can be tailored according tothe traffic requirements.
2, folded filter length of 10 ", 20", 30 ", 40"
3, the filter materials are polypropylene, Teflon, polyether sulfone.
4, 0.1, 0.22, 0.45 filtering hole, 1, 3, 5, 10, 20, 30, 50, 60um, divides the hydrophobic (suitable for gas) and hydrophilic (applicable to liquid) filter, can choose according to need.
5, customizable interface apparatus.

 

 

 

        Main technical parameters

 

Design pressure: 0.6/1.0/1.6Mpa

Design temperature: 5 ℃ ~ 100 ℃ (more than 60  to notify)

Seal type: O type ring or a flat pad

Interface: GB, HG, DIN, ANSI, JIS standard flange, threaded, clamps etc.

Apply Filter: flat, threaded, socket 222 and 226 filter etc.

Replace the pressure: 0.05MPA

Material: SS304316L, carbon steel lining

        Microporous filter specifications

型 号

滤芯数量
(支)
滤芯长度

直径
D

 A/B

C E

H

进出口径
N1/N2

压力表口
N3/N4

理论流量
(m3/H)

WYL1-10" 1 10" Ø108 100 320 200 530 DN20 DN32 0.5
WYL1-20" 1 20" Ø108 100 570 200 780 DN20 DN32 1
WYL3-10" 3 10" Ø200 100 320 300 580 DN25 DN32 1.5
WYL3-20" 3 20" Ø200 100 570 300 830 DN25 DN32 3
WYL5-10" 5 10" Ø230 120 320 330 630 DN25 DN32 2.5
WYL5-20" 5 20" Ø230 120 570 330 880 DN32 DN32 5
WYL5-30" 5 30" Ø230 120 820 330 1130 DN40 DN32 7.5
WYL5-40" 5 40" Ø230 120 1070 330 1380 DN40 DN32 10
WYL7-20" 7 20" Ø250 120 570 350 920 DN40 DN32 14
WYL7-30" 7 30" Ø250 120 820 350 1170 DN40 DN32 10
WYL7-40" 7 40" Ø250 120 1070 350 1420 DN40 DN32 15
WYL10-20" 10 20" Ø300 150 570 400 990 DN40 DN32 20
WYL10-30" 10 30" Ø300 150 820 400 1240 DN50 DN32 22.5
WYL10-40" 10 40" Ø300 150 1070 400 1490 DN50 DN32 30
WYL15-30" 15 30" Ø350 150 820 450 1260 DN50 DN32 30
WYL15-40" 15 40" Ø350 150 1070 450 1510 DN50 DN32 40
WYL20-30" 20 30" Ø400 180 820 500 1340 DN65 DN32 37.5
WYL20-40" 20 40" Ø400 180 1070 500 1590 DN65 DN32 50
WYL25-30" 25 30" Ø450 180 820 550 1370 DN65 DN32 45
WYL25-40" 25 40" Ø450 180 1070 550 1620 DN65 DN32 60
WYL30-30" 30 30" Ø500 200 820 600 1435 DN80 DN32  
WYL30-40" 30 40" Ø500 200 1070 600 1685 DN80 DN32  

Not listed in the table above specifications, please call the company, can do any number of coresand non-standard production.
The data in the table is for reference only, because of technical parameters of continuous improvement, if changes if difficult to timely notify. Based on the actual orders shall be the standard data. 

 
 

友情提醒:本公司所有图片及参数未经允许严禁复制或者转载,违者必究。